GLASS ENCAPSULATED THERMISTORS

The SD series of glass encapsulated thermistors offer the tighter tolerances and low costs associated with wafer thermistors, with the reliability and high temperature capabilities normally associated with glass probe thermistors. The rugged DO-35 diode style package is resistant to environmental stress. Tape and reel packaging is available for auto-insertion applications.
FEATURES:
• LOW COST
• HIGH ACCURACY
• COMPATIBLE WITH GLOBAL STANDARD
OPTIONS:
• NON-STANDARD LEAD LENGTH
• CHOICE OF ACCURACY
• TEMPERATURE RANGE
• CONNECTOR TYPE
• CONNECTOR STYLE—MOLDED OR STANDARD MOLEX
• VALUE-ADDED ASSEMBLY
• .070” (1.78MM) MAXIMUM DIAMETER TIP AVAILABLE
SPECIFICATIONS:
• THERMAL TIME CONSTANT: 5 SECONDS (STILL AIR) 0.5 SECONDS (STIRRED OIL)
• DISSIPATION CONSTANT: 2 mW/°C
• MAXIMUM OPERATING TEMPERATURE: 300°C
Resistance
@ 25 Deg C		 Part
Number		 Resistance
Tolerance
±%		 R. vs. Temp.
Curve
2500 SD252G10 10 G
3000 SD302G10 10 G
4000 SD402G10 10 G
5000 SD502G10 10 G
8200 SD822C10 10 C
10000 SD103C10 10 C
12000 SD123C10 10 C
20000 SD203C10 10 C
25000 SD253C10 10 C
30000 SD303C10 10 C
50000 SD503C10 10 C
75000 SD753C10 10 C
100000 SD104C10 10 C
250000 SD254C10 10 C
350000 SD354C10 10 C
500000 SD504D10 10 D
1000000 SD105D10 10 D

The standard resistance tolerance is ±10%. ±1%, 2%, and 5% are available upon request. To specify a tolerance other than ±10%, substitute the "10" suffix in the part number with the desired tolerance.

"The information contained herein is believed to be accurate. The user, however, should verify the suitability of a particular procuct for a specific application. Senor Scientific, Inc. does not warrant the accuracy of this information, and disclaims any liability with respect to its use."

© Sensor Scientific, Inc.