400 Series

Download PDF
The 400 Series-type 2252 ohm thermistor is recognized world-wide as the de facto standard for patient monitoring applications. Compatibility with all OEM monitoring equipment accepting the 400 Series thermistor is assured. To supplement the standard Molex termination, Sensor Scientific has developed an easy-grip molded connector to improve contact reliability in critical applications. The optional .070” maximum diameter tip allows for easier insertion into smaller size catheter assemblies..
FEATURES:
• LOW COST, HIGH ACCURACY
• STANDARD DISPOSABLE CONFIGURATIONS
• CUSTOM DESIGN
OPTIONS:
• NON-STANDARD LEAD LENGTH
• TEMPERATURE RANGE & ACCURACY
• CONNECTOR TYPE, MOLDED OR STANDARD MOLEX
• VALUE-ADDED ASSEMBLY
• .070” (1.78MM) DIAMETER TIP AVAILABLE
APPLICATIONS:
• ESOPHAGEAL STETHOSCOPES WITH TEMPERATURE MONITORING
• FOLEY CATHETERS
• SKIN TEMPERATURE
• ALSO USED FOR SPOT TEMPERATURE MEASUREMENT IN NON-BIOMEDICAL APPLICATIONS
Mechanical and Electrical Properties
  Standard Part Numbers
Resistance 1355 ohms @ 37 Deg C
2252 ohms @ 25 Deg C

SS400H437-28
For 28AWG Wire

SS400H437-30
For 30AWG Wire
Accuracy ± 0.2° Deg C (+/- 0.1°C Optional)
Accuracy Range +32 ~ +42 Deg C
Connector Type Molex 03-06-1023/02-06-1131
Molded Equivalent
Lead Length 30" (760mm)
Wire Gage 30AWG or 28AWG PVC Insulation
Tip Diameter 0.078 (1.98mm)Maximum

"The information contained herein is believed to be accurate. The user, however, should verify the suitability of a particular procuct for a specific application. Senor Scientific, Inc. does not warrant the accuracy of this information, and disclaims any liability with respect to its use."

© Sensor Scientific, Inc.